Beste Prijzen ! – Vatpompen EF van Finish Thompson FTI
De FTI EF vatpompen serie bieden een voordelige keuze voor onregelmatige en lichte toepassingen.
Een uitstekende vervanging van oude handpompen.
- ✔︎ Verschillende buisuitvoeringen – Polypropyleen – PVDF- Roestvrij staal 316 SS
- ✔︎ Zonder afdichting
- ✔︎ Motor met twee snelheden
- ✔︎ Zuigbuis verwisselbaar
- ✔︎ Lichte economische uitvoering
- ✔︎ De modellen in kunststof zijn voorzien van stroomkabels
- ✔︎ Bestaat ook met motor op 12 V batterij.
- ✔︎ Verdunde zuren
- ✔︎ Verdunde basen
- ✔︎ Solventen
- ✔︎ Zoutoplossingen
- ✔︎ Reinigingsvloeistoffen
- ✔︎ Koelvloeistoffen
- ✔︎ DEF AdBlue toevoegsel voor diesel
| Available Lengths | 41, 69, 102, 122, 137 cm |
| Tube Diameter | 32 mm |
| Discharge Size | 19.1 mm max |
| Raccord du tuyau | Hose barb |
| Electric Motor | Motor 12 V | Air Motor | |
|---|---|---|---|
| Maximum Flow | 64 L/min | 53 L/min | 57 L/min |
| Maximum Head | 6.1 m | 4 m | 5.2 m |
| Maximum Specific Gravity | 1.6 | 1.6 | 1.6 |
| Maximum Viscosity | 300 cP | 100 cP | 300 cP |
| Tube | Polypropylene |
| Sharft | Stainless Steel 316 |
| O-Ring | FKM or EPDM |
| Impeller Material | Polypropylene |
| Maximum Temperature | 66°C |
| Minimum Temperature | -18°C |
| Available Lengths | 41, 69, 102, 122, 137 cm |
| Tube Diameter | 32 mm |
| Discharge Diameter | 19.1 mm max |
| Discharge Type | Hose barb |
| Electric Motor | Motor 12 V | Air Motor | |
|---|---|---|---|
| Maximum Flow | 64 L/min | 53 L/min | 57 L/min |
| Maximum Head | 6.1 m | 4 m | 5.2 m |
| Maximum Specific Gravity | 1.6 | 1.6 | 1.6 |
| Maximum Viscosity | 300 cP | 100 cP | 300 cP |
| Tube | PVDF |
| Shaft | Nickel Chrome 625 |
| O-Ring | FKM |
| Impeller Material | ETFE |
| Maximum Temperature | 71°C |
| Minimum Temperature | -18°C |
| Available Lengths | 41, 69, 102, 122 cm |
| Tube Diameter | 32 mm |
| Discharge Diameter | 19.1 mm max |
| Discharge Type | Hose barb |
| Electric Motor | Motor 12 V | Air Motor | |
|---|---|---|---|
| Maximum Flow | 64 L/min | 53 L/min | 57 L/min |
| Maximum Head | 6.1 m | 4 m | 5.2 m |
| Maximum Specific Gravity | 1.6 | 1.6 | 1.6 |
| Maximum Viscosity | 300 cP | 100 cP | 300 cP |
| Tube | Stainless Steel 316 |
| Shaft | Stainless Steel 316 |
| O-Ring | FKM |
| Impeller Material | ETFE |
| Maximum Temperature | 100°C |
| Minimum Temperature | -18°C |
IP 24 Electric Motors
Splashproof
| Models | Certif | Network | Power In/Out |
RPM | Max Viscosity |
|---|---|---|---|---|---|
| S2 | CE | 230 V 50-60 Hz |
230/110 W | 8000 to 14000 RPM | 300 cP |
| S6 | CE | 12 V | 150/100 W | 8000 to 14000 RPM | 300 cP |
Air Motors **
| Models | Certif | Network | Power In/Out |
RPM | Max Viscosity |
|---|---|---|---|---|---|
| S4* | CE | 2.75 bar @ 0.9 L/sec |
370 W | 300-11000 RPM | 300 cP |
