Pumps Benefits
- Extremely low power consumption -> Reduces your power bill.
- Long life wear parts -> Low operating costs.
- Fluid totally separated from pump mechanism -> No possible fluid contamination.
- Less dry run sensitive -> Ideal when Dry Run risks exists.
- Self priming -> Easy self-starting.
- Very simple to clean -> Safe, quick and simple cleaning process.
Heavy Duty Peristaltic Pumps for Industrial Applications
This Heavy Duty Peristaltic Pumps are designed for the industry, where the conditions of use of traditional and progressive cavity pumps reach their limits.
The LSM pumps flow rate ranges from 0 to 170 l per hour for the smaller models up to 230 m3 per hour or even 300 m3 per hour for larger models at rated speed. Higher flow rates are available on request.
The hose diameter varies from 10 to 200 mm in diameter depending on the LSM Pump model.
LSM Heavy Duty Peristaltic Pumps design and construction make them particularly well suited for applications where the fluids are abrasive, corrosive, aggressive, viscous, with high solids concentration – in other words, where the other pumps reach their limits.
Very Economical to Run, Indeed!
Their hose is also very resistant. It easily offers an extended lifetime that spans up to twice as long as the typical lifetime of a eccentric screw pump stator.
Maintenance is also greatly facilitated by the hose accessibility and speed at which it can be replaced.
An efficiency that makes LSM pumps particularly competitive.
Peristaltic LSM Pumps are not only the largest ever built peristaltic pumps but thanks to their technology, uses half the energy as its traditional counterpart.
A few typical applications
- Biogas, agriculture
- Fisheries, fishing boat unloading, fish farms
- Paper industry
- Paints and dyes
- Food industry
- Abattoir
Characteristics
LSM10 peristaltic pumps are generally used as dosing or transfer pumps in applications that require a soft liquid treatment, such as for example in the food industry with products such as mayonnaise, sauces, emulsions, …
| Nominal Flow | 2.5 L/min |
| Nominal Pressure | 5 bars |
| Maximum Pressure | 10 bars |
| Hose diameter | 10 mm |
| Weight | 25 kg |
Characteristics
LSM15 peristaltic pumps are generally used as dosing or transfer pumps in applications that require a soft liquid treatment, such as for example in the food industry with products such as mayonnaise, sauces, emulsions, …
| Nominal Flow | 5.5 L/min |
| Nominal Pressure | 5 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 15 mm |
| Weight | 25 kg |
Characteristics
The LSM25 peristaltic pump is suitable for pumping thicker liquids.
The pump can handle everything: sludge, glue, acids, concrete and food.
| Nominal Flow | 1 m3/hour |
| Nominal Pressure | 5 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 25 mm |
| Weight | 65 kg |
Characteristics
The LSM32 peristaltic pump is suitable for pumping thicker liquids.
The pump can handle everything: sludge, glue, acids, concrete and food.
| Nominal Flow | 2 m3/hour |
| Nominal Pressure | 5 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 32 mm |
| Weight | 105 kg |
Characteristics
The LSM40 peristaltic pump is suitable for pumping thicker liquids.
The pump can handle everything: sludge, glue, acids, concrete and food in large quantities.
| Nominal Flow | 3 m3/hour |
| Nominal Pressure | 5 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 40 mm |
| Weight | 120 kg |
Characteristics
The LSM50 peristaltic pump is suitable for pumping thicker liquids.
The pump can handle everything: sludge, glue, acids, concrete and food in large quantities.
| Nominal Flow | 6.5 m3/hour |
| Nominal Pressure | 5 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 50 mm |
| Weight | 180 kg |
Characteristics
The LSM65 peristaltic pump is suitable for pumping thicker liquids.
The pump can handle everything: sludge, glue, acids, concrete and food in large quantities.
| Nominal Flow | 12 m3/hour |
| Nominal Pressure | 5 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 65 mm |
| Weight | 400 kg |
Characteristics
The LSM80 peristaltic pump is suitable for pumping thicker liquids.
The pump can handle everything: sludge, glue, acids, concrete and food in large quantities.
| Nominal Flow | 20 m3/hour |
| Nominal Pressure | 5 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 80 mm |
| Weight | 500 kg |
Characteristics
The LSM100 peristaltic pump is suitable for pumping thicker liquids.
The pump can handle everything: sludge, glue, acids, concrete and food in large quantities.
| Nominal Flow | 40 m3/hour |
| Nominal Pressure | 4 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 100 mm |
| Weight | 700 kg |
Characteristics
The LSM125 peristaltic pump is suitable for pumping thicker liquids.
The pump can handle everything: sludge, glue, acids, concrete and food in large quantities.
| Nominal Flow | 75 m3/hour |
| Nominal Pressure | 4 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 125 mm |
| Weight | 1100 kg |
Characteristics
The LSM150 is one of the largest peristaltic pumps in the world. The LSM150 peristaltic pump is suitable for pumping thicker liquids with larger particles. The pump can handle everything: sludge, adhesives, acids, concrete, fish and food in large quantities. The pump is widely used in agriculture, biogas, mining and fishing because it can handle large particles.
The pump is made of steel as standard and then hot-dip galvanized. The pump can also be made from stainless steel and painted with a two-component paint. We offer special types of coatings for use in harsh environments. This pump can also be ordered with a hydraulic motor.
| Nominal Flow | 125 m3/hour |
| Nominal Pressure | 4 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 150 mm |
| Weight | 1800 kg |
Characteristics
The LSM200 peristaltic pump is suitable for pumping thicker liquids with larger particles. The pump can handle everything: sludge, adhesives, acids, concrete, fish and food in large quantities. The pump is widely used in agriculture, biogas, mining and fishing because it can handle large particles.
The pump is made of steel as standard and then hot-dip galvanized. The pump can also be made of stainless steel if desired. The pump can also be made from ordinary steel and then painted with powder. We offer special types of coatings for use in harsh environments. This pump can also be ordered with a hydraulic motor.
| Nominal Flow | 300 m3/hour |
| Nominal Pressure | 4 bars |
| Maximum Pressure | 10 bars |
| Hose Diameter | 200 mm |
| Weight | 4500 kg |
